How configuration rules decide which modules can be joined

"Any product can be placed at any point if it fits based on what's around it." A customer wrote that sentence to describe the rules of their range. Every modular range has rules like it: which modules join which, which way a corner turns, how close two pendants may hang, which edge goes with which tabletop. They usually exist already, in a spreadsheet, a brochure, a set of drawings, or with the person who answers the dealers' questions.

We build those rules into your configurator. When your customer adds a module, it snaps to the connection points set up for your range. The price and the parts list are calculated from the modules in the build. Between September 2024 and August 2026, more than USD 7 million in orders were placed through our configurators, counted at the 12 customers where we track orders.

The rules come from your own material. Landscape Forms described its table and umbrella pairings in a spreadsheet and marked in a document where the planters attach to its terraced benches, and the pairings in the Site Planner are built from those. On 16 September SOFACOMPANY wrote that the Daphne corner module and chaise longue could not be joined, although the combination works in its other sofa families. The rule was changed and live on 17 September. The image shows the two modules joined in the Daphne planner.

A starting layout from Pre-Sets / Layout Starters follows the same rules, so everything your customer adds to it attaches the same way.

A Daphne corner module joined to a chaise longue in the SOFACOMPANY sofa planner

Who sets up and changes the rules

Rules for what can be combined are standard in modular configurators. The difference lies in how complete the rules are and who keeps them current as the range changes. The Landscape Forms Site Planner has more than 2,100 connection points across 500+ modules, each one a place where one product can join another. One of those modules has 1.5 million variants, with no measurable effect on performance.

For a company that builds its own configurator, the 3D models are the part of the work everyone sees. The rules take longer to get right, because each new module has to be checked against the modules it can meet, and they have to be updated each time the range changes. Setting up the rules is part of setting up each product series, and we do that work. Rules are set per product family and per collection, so a change to one collection leaves the others as they are. When your range changes, you tell us which modules or collection and what should change, and we update the rule. In September that was the spacing between luminaires in one Estiluz collection, and a Landscape Forms case where a planter could snap in between two joined wedge benches. The rule was changed on 23 September to take that position out, and the fix went live the same day.

Collision in a room plan is a separate setting: props such as trees and human silhouettes are set to block products or let them pass.

2,100+ connection points across 500+ modules in the Landscape Forms Site Planner

Frequently Asked Questions

Questions customers have asked about configuration rules. Missing something? Reach out and we will add it.

Can we change a rule, such as the minimum distance between luminaires, for one collection only?
Yes. Rules are set per product family and per collection. In September the Estiluz sales team asked for a shorter minimum distance between luminaires in one collection and a higher maximum number of pendants in another. Each change was made for that collection alone and sent to Estiluz on a test link to check.
Why can two modules be joined in one sofa family and stay apart in another?
Each family has its own rules, built from its own modules. If your range has a combination that the planner refuses, the rule for that family is missing the connection, and we add it. SOFACOMPANY reported exactly that for the Daphne chaise longue and corner module on 16 September. The connection was added and live the following day.
Our rules are in a spreadsheet or a product guide. Is that enough to start?
Yes. Customers have sent us their rules as spreadsheets and as documents with the attachment points marked, and a product guide or a rules sheet gives us the same starting point. Landscape Forms described its table and umbrella pairings in a spreadsheet and its planter and bench pairings in a document. We turn that material into rules in the configurator and come back with questions where it leaves a combination open.
Who changes the rules when our range changes?
We do, as part of the work on a new or changed series. You tell us which modules or collection and what should change, we update the rule, and we tell you when it is live. Some changes go to a test link first, so you can check them before your customers see them. A new collection gets its own rules next to the existing ones.
We already have a configurator. Can our rules move over?
We build the rules again on our platform, from the material your current configurator was built from: the spreadsheet, the product guide or the drawings. Where that material is missing, we go through the combinations your current configurator allows with you, series by series. Configurations your customers saved in the old tool stay in that tool, so the two can run side by side while the series move over.
Does the parts list match what the customer built?
The parts list is generated from the configuration, so the modules and the parts that follow from them come from the same rules. When a parts list needs a correction, we make it in the setup for that range. In August 2024 RackBuddy asked for its dresser brackets to be counted as one set and for a hex key on every Original build, and both were added to the parts list.

Want to learn more about configuration rules?

Book a personal demo and see how this feature works for your products.